Battery Service

4 of 35

VISUAL INSPECTION
Battery service should begin with a thorough visual inspection. This inspection may reveal simple, easily corrected problems.

1 . Check for cracks in the battery case and broken terminals. Either may allow electrolyte leakage, which requires battery replacement.

2. Check for cracked or broken cables or connections. Replace, as needed.

3. Check for corrosion on terminals and dirt or acid on the case top. Clean the terminals and case top with a mixture of water and baking soda. A battery wire brush tool is needed for heavy corrosion on the terminals.

4. Check for a loose battery hold-down or loose cable connections. Clean and tighten, as needed.